Explorer 2WD V8-4.6L VIN 8 (2006)
Shift Solenoid: Service and Repair
Solenoid Body Assembly
Material
Material
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the drain plug and drain the fluid.
3. NOTE: Clean the area around connector to prevent contamination of the solenoid body connector.
Disconnect the solenoid body harness connector.
4. NOTE: The transmission fluid pan gasket is reusable, clean and inspect for damage. If not damaged, the gasket should be reused.
Remove the 16 transmission fluid pan screws, fluid pan and gasket.