Explorer 2WD V8-4.6L VIN 8 (2006)
![background image](/ford/explorer_2wd/v8-4.6l_vin_8/Page-1831004.png)
9. Remove the transmission cooler tubes from the vehicle.
Installation
1. Install the transmission cooler tubes into the vehicle.
2. Install the transmission fluid cooler tube bracket onto the stud.
3. Install the nut.
^
Tighten to 23 Nm (17 inch lbs.).
4. CAUTION: To prevent cross threading, all tube nuts must be hand started before being torqued to specification.