Explorer 2WD V8-4.6L VIN 8 (2006)
4. Disconnect the transmission fluid cooler hoses.
^
Remove and discard the transmission fluid cooler hose clamps.
5. Remove the upper transmission fluid cooler bolt.
6. Remove the lower transmission fluid cooler bolts and lift out the cooler.
Installation
1. Install the transmission fluid cooler and lower bolts.
^
Tighten to 10 Nm (89 inch lbs.).
2. Install the upper transmission fluid cooler bolt.
^
Tighten to 10 Nm (89 inch lbs.).