Explorer 4WD V6-245 4.0L (1991)
shoe-to-anchor spring and unhook the cable anchor. Remove the anchor pin plate (if equipped).
NOTE: For additional information see Brake Spring Removal and Installation Notes.
8. Remove the cable guide from the secondary shoe.
Removing/Installing Shoe Hold Down Springs
9. Remove the shoe hold-down springs using a hold down spring tool. Remove the shoes, adjusting screw, pivot nut, and socket.
10. Remove the parking brake link and spring. Disconnect the parking brake cable from the parking brake lever.
Park Brake Lever Assembly
11. Remove the brake secondary shoe. Remove the retainer clip and spring washer and remove the parking brake lever.