Explorer 4WD V6-245 4.0L (1991)
15.
Remove the two (2) screws that attach the grille to the headlamp housing.
16.
Use a flat blade screwdriver to depress the spring tabs which are accessible through the lower outboard grille openings. Detach the grille from the
headlamp housings.
17.
Remove the grille from the vehicle.
18.
Remove the radiator. Refer to Section 12-03 of the appropriate Service Manual.
19.
Remove the radiator top and bottom seals and discard.
20.
Remove the condenser. Refer to Section 12-03 of the appropriate Service Manual.
21.
Remove the old condenser seals and discard.
22.
Install the Radiator Air Side Deflector (F2TZ-8310-A), Radiator Air Lower Deflector (F4TZ-8327-B) and Radiator Side Deflector Seal
(F4TZ-8348-A) as shown in Figure 5.