ford Workshop Repair Guides

Ford Workshop Service and Repair Manuals

All Other Service Bulletins for Tires: > < Transfer Case - Unable to Disengage 4WD Into 2WD|Page 1416
Page 1
background image

Tires: All Technical Service Bulletins
Suspension/Tires - Vehicle Bouncing/Pitching

 SUSPENSION - UNACCEPTABLE RIDE - 4 X 2 AND 4 X 4 FOUR DOOR MODELS BUILT BEFORE 11/1/90
Article No. 90-25-14

LIGHT TRUCK:

1991 EXPLORER

ISSUE:

Unacceptable vehicle ride described as higher than normal bounce or pitch may be caused by excessive tire pressure or by the shock absorbers.
The condition is most noticeable during freeway driving.

ACTION:

Use the following procedure to determine if new shock absorbers are required. The new shock absorbers have new internal valving that
stiffens the shock absorber rebound action.

1.

Locate the vehicle certification label on the left hand "B" pillar.

2.

Note the recommended tire pressure listed on the vehicle certification label.

3.

Adjust the tire pressure to the values shown on the vehicle certification label.

4.

Road test the truck to see if the concern has been corrected.

5.

If the concern is still present, install four (4) new shock absorbers. Refer to the following parts application chart to select the proper shock
absorbers.

OTHER APPLICABLE ARTICLES: None
WARRANTY STATUS:

Eligible Under Basic Warranty Coverage

OPERATION DESCRIPTION

TIME

902514A

Adjust Tire Pressure And

0.3 Hr.

Road Test

902514B

Adjust Tire Pressure, Road

1.2 Hr.

Test And Install New Shock Absorbers

DEALER CODING

BASIC PART NO.     CONDITION CODE

18125

63

OASIS CODES:

304000

All Other Service Bulletins for Tires: > < Transfer Case - Unable to Disengage 4WD Into 2WD|Page 1416