Explorer 4WD V6-245 4.0L (1991)
11.
Install bottom half of shroud by sliding guides in bottom half of shroud into tabs in top half.
12.
Install shroud retaining screws and torque to 18.5-25.6 inch lbs.
13.
On models with tilt steering, install steering column collar by pressing on top and bottom while installing on column.
14.
Install tilt lever and torque to 2.2-3.6 ft. lbs.
15.
On all models, install steering wheel.
16.
Install lower dash panel trim cover, then connect battery ground cable.
17.
Check for proper start in P and N, and ensure that vehicle cannot be started in D or R positions and steering wheel locks in LOCK position.