Explorer 4WD V6-4.0L (2009)
Parking Assist Control Module: Service and Repair
Parking Aid Module (PAM) - Explorer
Removal and Installation
1. Disconnect the Parking Aid Module (PAM) bumper harness from the body harness.
2. Remove the rear bumper cover.
3. Remove the 4 insulator-to-bumper cover nuts and the insulator from the bumper cover.
4. Disconnect the PAM bumper harness from the PAM.
5. Remove the 2 PAM bolts.
6. Remove the PAM assembly.
7. To install, reverse the removal procedure.