Explorer 4WD V6-4.0L (2009)
9. NOTICE: The RH camshaft sprocket bolt is a LH-threaded bolt. Turning the bolt in the wrong direction can damage the bolt.
Using the Torque Wrench Extension with the Camshaft Sprocket Nut Socket 303-565, loosen the RH camshaft sprocket bolt.
10. Loosen the top 2 Camshaft Sprocket Holding Tool clamp bolts.
11. NOTE: The camshaft timing slots are off-center.
Position the camshaft timing slots below the centerline of the camshaft and install the Camshaft Holding Tool and the Adapter for 303-577 on the
front of the RH cylinder head.
12. Remove the RH hydraulic timing chain tensioner.
-
Discard the washer.
13. Install the Timing Chain Tensioner.
