Explorer 4WD V6-4.0L (2009)
Transmission Mount: Service and Repair
5R55S
Transmission Support Insulator - Four Wheel Drive (4WD)
Removal
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If equipped, remove the skid plate bolts and the skid plate.
3. Support the transmission with a transmission jack.
4. Remove the 2 transmission support insulator-to-crossmember nuts.
5. NOTE: Crossmember and exhaust system shown removed.
NOTE: LH shown, RH similar.
Remove the 2 transmission support insulator-to-extension housing screws.