Explorer 4WD V6-4.0L (2009)
Wiper Motor: Service and Repair
Wiper Motor - Rear Window
Wiper Motor - Rear Window
Removal and Installation
1. Remove the rear wiper pivot arm. For additional information, refer to Wiper Pivot Arm - Rear See: Wiper Arm/Service and Repair/Wiper Pivot
Arm - Rear.
2. Remove the rear window wiper motor grommet.
1. Remove the pivot shaft nut.
-
To install, tighten to 10 Nm (89 lb-in).
2. Remove the grommet.
3. Open the liftgate window.
4. Remove the wiper motor cover trim panel.
5. Remove the rear window wiper motor.
1. Disconnect the electrical connectors.
2. Remove the 2 rear window wiper motor nuts.
-
To install, tighten to 6 Nm (53 lb-in).
3. Remove the rear window wiper motor.
6. To install, reverse the removal procedure.