Explorer 4WD V6-4.0L VIN E (1999)
Air Door Actuator / Motor: Service and Repair
Blend Door Motor
REMOVAL
1. Remove the instrument panel, please refer to Body and Frame/Interior Trim/Dash Board/Service and Repair/ See: Body and Frame/Interior
Moulding / Trim/Dashboard / Instrument Panel/Service and Repair.
2. Remove the A/C electronic door actuator motor.
-
Remove the screws.
-
Disconnect the harness connector and remove the A/C electronic door actuator motor.
INSTALLATION
1. Follow the removal procedure in reverse order.