Explorer 4WD V6-4.0L VIN E (1999)
8. Install the selected fowl reverse band servo piston and rod.
1
Install the low/reverse band servo piston and rod assembly.
2
Install a new low/reverse band servo separator plate cover gasket.
3
Install the low/reverse band servo cover.
4
Loosely install the low/reverse band servo piston cover screws.
9. Tighten the servo cover screws in the sequence shown.
10. Install the transmission fluid filter.
1
Install the transmission fluid filter.
2
Install the transmission fluid filter screw.
11. Install the transmission fluid pan.
1
Position a new transmission fluid pan gasket on the transmission fluid pan.
2
Install and align the transmission fluid pan. Loosely install the transmission fluid pan screws.