Explorer 4WD V6-4.0L VIN E (1999)
Axle Shaft: Service and Repair
Front Drive Halfshafts, Constant Velocity Type
Removal and Installation
Halfshaft
Special Tool(s)
Removal and Installation
NOTE: Except where noted, this procedure applies to both front halfshaft assemblies. Use only the procedure steps necessary for the halfshaft
requiring removal/installation.
LH/RH halfshaft
1. Remove the center cap from the front wheel.
2. Loosen the front axle wheel hub retainer.
3. With the vehicle in NEUTRAL, raise and support the vehicle.
4. Remove the front wheel and tire assembly.