Explorer 4WD V8-302 5.0L VIN P SFI (2000)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch Remote Control
REMOVAL
NOTE: If equipped with power locks, perform steps one and eight.
1. Remove the liftgate lock actuator. For additional information, refer to Liftgate Lock Actuator.
2. Remove the liftgate window latch. For additional information, refer to Liftgate Latch.
3. Remove the vent panel.
1
Remove the pin-type retainers.
2
Remove the vent panel.
4. Disconnect the liftgate latch release rods.
1
Open the clips.
2
Disconnect the liftgate latch release rods.
5. Disconnect the liftgate handle rod.
1
Open the clip.
2
Disconnect the liftgate handle rod.