Explorer 4WD V8-302 5.0L VIN P SFI (2000)
1. Note: Coat the new thermostat gasket with Gasket and Trim Adhesive F3AZ-19B508-AA or equivalent prior to installation.
Install the new thermostat gasket.
2. Install the water thermostat into the water hose connection.
-
Align the notch in the thermostat with the notch in the water hose connection.
3. Install the water hose connection.
4. Install the water bypass tube.
1
Position the water bypass tube and hose clamps.
2
Tighten the hose clamps.
5. Install the upper radiator hose.
6. Fill the cooling system.