Explorer 4WD V8-302 5.0L VIN P SFI (2000)
Air Door Actuator / Motor: Service and Repair
Air Door Actuator / Motor, HVAC
Air Inlet Duct Door Vacuum Control Motor
REMOVAL
1. Release the stops and lower the glove compartment door to the floor.
2. Remove the screws and disconnect the vacuum hose.
3. Rotate the vacuum control motor.
CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Defrost Door Vacuum Control Motor
REMOVAL