Explorer 4WD V8-302 5.0L VIN P SFI (2000)
^
Using the Knuckle Seal Replacer, Threaded Drawbar and Bearing Cup Replacer, install the seal.
2. Install the wheel hub.
^
Position the wheel hub on the front wheel driveshaft and joint and into the front wheel knuckle. Install the three bolts.
3. Install the dust shield.
4. Install the front brake anti-lock sensor.
1
Position the front brake anti-lock sensor.
2
Install the bolt.
5. Install the wheel hub retainer nut and washer assembly.
6. Install the brake disc.