Explorer 4WD V8-302 5.0L VIN P SFI (2000)
Evaporative System Service Port: Service and Repair
REMOVAL
1. Remove the clip.
2. Disconnect the hoses.
3. Remove the test port assembly.
^
Disconnect the fitting.
^
Remove the test port assembly.
INSTALLATION
1. To install, reverse the removal procedure.
^
Leak test the evaporative emissions system. For additional information, refer to Evaporative Emission System Leak Test. See: Testing and
Inspection/Component Tests and General Diagnostics/Component Tests/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. For additional information, refer to Evaporative Emission Repair
Verification Drive Cycle. See: Service and Repair
