Explorer 4WD V8-302 5.0L VIN P SFI (2000)
Starter Relay: Service and Repair
REMOVAL
WARNING: WHEN PERFORMING MAINTENANCE ON THE STARTING SYSTEM BE AWARE THAT HEAVY GAUGE LEADS ARE
CONNECTED DIRECTLY TO THE BATTERY. MAKE SURE PROTECTIVE CAPS ARE IN PLACE.
1. Disconnect the battery ground cable.
2. Disconnect the starter motor solenoid relay switch wiring.
1
Remove the protective cover.
2
Disconnect the push-on electrical connector.
3
Remove the nuts.
4
Remove the cable.
3. Remove the starter motor solenoid relay switch.
1
Remove the engine sensor/generator wires.
2
Remove the bolts and ground wire.
3
Remove the starter motor solenoid relay switch.
INSTALLATION
1. Follow the removal procedure in reverse order.