Explorer 4WD V8-302 5.0L VIN P SFI (2000)
9. Install the swing rods back into the seat back trim cover sleeves.
10. Reaching between the seat back trim cover and the seat back pad, at the middle row of hog rings, position the top of the swing rods under the
listing wire in the seat back pad.
NOTE: The seat back trim cover has been inverted for clarity.
11. Install new hog rings onto the swing rods (one shown).
12. Pull the seat back rest trim cover completely down and connect the hook and loop fastener to the seat back cushion.
13. Route the seat back heating element wire harness (if equipped).