Explorer 4WD V8-302 5.0L VIN P SFI (2000)
3. Unhook the trim cover J-clip.
WARNING: FRONT SEAT BACK TRIM COVERS INSTALLED ON SEATS EQUIPPED WITH SIDE AIR BAGS CANNOT BE
REPAIRED. THEY ARE TO BE REPLACED (CLEANING IS PERMISSIBLE).
4. Remove the seat backrest trim cover swing rods.
1
Remove and discard the hog rings.
2
Remove the seat backrest trim cover cushion swing rods.
5. Roll the seatback trim cover in an inside out fashion to the side air bag deployment chute.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip, or the hook and loop strip can be torn from the
seat cushion foam.
