Explorer 4WD V8-302 5.0L VIN P SFI (2000)
12. Use the Pitman Arm Puller to separate the front wheel knuckle front the front suspension lower arm.
13. Remove the pinch bolt.
14. Remove the front wheel knuckle.
Installation
1. Install the front wheel knuckle pinch bolt and nut.
1
Position the front wheel knuckle on the front suspension upper arm.
2
Install the pinch bolt and nut.
2. Install the front suspension arm lower ball joint castellated nut.
1
Position the front wheel knuckle,
2
Install the castellated nut.
3
Install a new cotter pin.