Explorer 4WD V8-302 5.0L VIN P SFI (2000)
1. Install the extension housing and gasket.
1. Position the extension housing gasket and the extension housing.
2. Install the bolts and nuts.
2. Install the new extension housing seal.
1. Align Extension Housing Seal Replacer with the seal.
2. Install the extension housing seal.
3. Raise and position the transmission.
4. Install the transmission crossmember.
1. Position the transmission crossmember.
2. Install the bolts.
5. Install the transmission crossmember bolts.
6. Remove High-Lift Jack.