Explorer 4WD V8-4.6L (2008)
![background image](/ford/explorer_4wd/v8-4.6l/Page-2476001.png)
Auxiliary Step / Running Board Module: Service and Repair
POWER RUNNING BOARD (PRB) MODULE
Removal and Installation
1. Remove the RH C-pillar trim panel.
2. Disconnect the power running board (PRB) module electrical connectors.
3. Remove the 3 screws and the PRB module assembly.
-
To install, tighten to 7 Nm (62 lb-in).
4. To install, reverse the removal procedure.