Explorer 4WD V8-4.6L (2008)
![background image](/ford/explorer_4wd/v8-4.6l/Page-1744002.png)
2. NOTE: If the brake disc cannot be removed easily, apply rust penetrant on the brake disc-to-hub mating surfaces.
Remove the brake disc.
Installation
1. Clean any rust or foreign material from brake disc and wheel hub.
^
Use parts cleaner to clean the front brake disc and hub surfaces.
2. Apply a thin coat of anti-seize lubricant to the hub flange.
3. Install the brake disc.
4. Position the brake caliper, brake pads and brake caliper anchor plate assembly and install the 2 brake caliper anchor plate bolts.
^
Tighten to 165 Nm (122 lb-ft).
Disc Removal and Installation, Rear
Brake Disc
Removal
1. Remove the wheel and tire.