Explorer 4WD V8-4.6L (2008)
4. NOTE: Do not allow the camshaft roller followers to move out of position when installing the camshaft.
Install the camshaft bearing caps in their original locations.
^
Lubricate the camshaft bearing caps with clean engine oil.
^
Position the front camshaft bearing cap.
^
Position the remaining camshaft bearing caps.
^
Install the bolts loosely.
5. Tighten the bolts in the sequence shown.
^
Tighten to 10 Nm (89 lb-in).
6. NOTE: Engine front cover removed for clarity.
Remove the special tool.