Explorer 4WD V8-4.6L (2008)
![background image](/ford/explorer_4wd/v8-4.6l/Page-659001.png)
Piston: Overhaul
Piston
Disassembly
1. Remove the piston rings from the piston.
^
Discard the piston rings.
2. Remove the piston pin retainers and the piston pin.
3. Separate the piston from the connecting rod.
4. Clean and inspect the piston and connecting rod.
Assembly
1. NOTE: The connecting rod must be installed into the piston with identification markings toward the front.
Position the connecting rod in the piston.