Explorer 4WD V8-4.6L (2008)
![background image](/ford/explorer_4wd/v8-4.6l/Page-1076002.png)
Exploded View
Special Tool(s)
Special Tool(s)
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. If the RH heated oxygen sensor (HO2S) is being serviced, remove the bolts and position the heat shield aside.
-
To install, tighten to 20 Nm (15 lb-ft).
3. Disconnect the HO2S electrical connector.