Explorer 4WD V8-4.6L (2008)
3.
Lubricate the remaining wheels at the outboard wheel flange, between the cladding and the wheel inter[ace. Use Motorcraft Silicone Spray
Lubricant and spray lubricant with an extension nozzle. (Figures 1 and 2)
NOTE
NEW WHEELS WILL NOT REQUIRE LUBRICATION.
4.
Clean any excess lubricate off the wheel with a soft cloth.
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
072304A
2007-2008 Explorer,
0.9 Hr.
Explorer Sport Trac,
Mountaineer, 2007 Edge:
Replace One Wheel and
Lubricate Remaining Three
Wheels. Includes Test
Drive, Transfer Tire
Pressure Monitor Sensor
(TPMS), And Balance
Wheel Assembly (Do Not
Use With 1007A, 1007A1)
072304B
2007-2008 Explorer,
1.1 Hrs.
Explorer Sport Trac,
Mountaineer, 2007 Edge:
Replace Two Wheels and
Lubricate Remaining Two
Wheels. Includes Test
Drive, Transfer TPMS, And
Balance Wheel Assemblies
(Do Not Use With 1007A,
1007A1)
072304C
2007-2008 Explorer,
1.4 Hrs.
Explorer Sport Trac,
Mountaineer, 2007 Edge: