Explorer 4WD V8-4.6L (2008)
Back Window Glass: Service and Repair
Window Glass - Rear, Fixed
WINDOW GLASS - REAR, FIXED
Material
Material
Removal
NOTE: If the rear window glass is being removed to repair a dust/water leak, remove and reinstall the existing rear window glass.
1. Remove the cab rear panel.
2. Remove the 15 rear window glass mounting nuts.
3. CAUTION: Use only a plastic windshield setting tool to slide under the seal to separate the foam core butyl from the glass. Once the glass
starts to separate from the body, constant hand pressure will break the seal and the glass can be removed. Failure to use a plastic
windshield setting tool can damage the body or the glass frame.
Remove the rear window glass.
Installation
1. NOTE: Remove as much as possible of the foam core butyl from the body and rear window glass prior to installation.