Explorer 4WD V8-4.6L VIN W (2002)
![background image](/ford/explorer_4wd/v8-4.6l_vin_w/Page-3298001.png)
Lock Cylinder Switch: Service and Repair
REMOVAL
1. Remove the driver door trim panel.
2. Position the watershield aside.
3. Remove the door disarm switch.
1
Remove the "E" clip.
2
Remove the lock rod actuator.
3
Remove the nut.
4
Remove the door disarm switch.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: The door disarm switch mark must be positioned towards the harness side of the switch prior to installation.