Explorer 4WD V8-4.6L VIN W (2002)
![background image](/ford/explorer_4wd/v8-4.6l_vin_w/Page-3001003.png)
11. Disconnect the vacuum line connectors in the engine compartment.
12. Push the vacuum lines into the passenger compartment.
-
Detach the vacuum line seal from the dash panel and pull it into the passenger compartment.
-
Working from outside the vehicle, push the vacuum lines into the vehicle.
13. Detach the electrical connectors.
1
Disconnect the electrical connectors.
2
Detach the electrical connector from the housing.
14. Disconnect the electrical connector from the LH temperature blend door actuator.