Explorer 4WD V8-4.6L VIN W (2002)
1. Release the two retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
2. Release the two retaining tabs. Disconnect the driver air bag module electrical connector.
-
Label the driver air bag module squib number on the driver air bag module electrical connector before disconnecting.
3. Disconnect the horn switch electrical connector.
4. Remove the driver air bag module.
13. Attach the restraint system diagnostic tools to the clockspring resistor is removed, an open circuit fault will be generated by the restraints column.
All vehicles
14. Push in on the glove compartment sides, releasing the stops and lowering it out of the way.
Vehicles built up to 03/2002
15. Through the glove compartment opening, release the tab and disconnect the passenger air bag module electrical connector.