Explorer 4WD V8-4.6L VIN W (2002)
4. Disconnect the accelerator controls.
^
Disconnect the accelerator cable.
^
Disconnect the speed control actuator cable.
^
Disconnect the return spring.
5. Remove the throttle body.
NOTE: Discard the Throttle Body (TB) gasket.
INSTALLATION
1. To install, reverse the removal procedure. Tighten throttle body bolts in two stages.
1
Tighten to 9 Nm (80 Lb-In).
2
Tighten an additional 90 degrees (1/4 turn).