Explorer 4WD V8-4.6L VIN W (2002)
4. NOTE: Vehicles with an advanced restraint system shown, all others are similar.
Connect the clockspring electrical connectors.
-
Vehicles built prior to 03/2002 will have two connectors.
5. NOTE:
-
Slight turning of the clockspring rotor is allowable for alignment purposes to the steering column.
-
Vehicles with an advanced restraint system shown, all others are similar.
Install the clockspring onto the steering column.
1. With the flats of the clockspring aligned to the flats of the steering column, slide the clockspring onto the steering column.
2. Install the bolts.
Vehicle repairs reusing the same clockspring
6. Remove the tape applied during clockspring removal.
All vehicles
7. Install the multi-function switch.
1. Align the multi-function switch and slide it down into position.
2. Check that the retaining tab is engaged.
3. Install the screw.
4. Connect the electrical connector and install the pin-type retainer.