Explorer 4WD V8-4.6L VIN W (2002)
1. Before installing the third row safety belt retractor, make sure the anti-rattle pad is on the back of the retractor.
2. Position the third row safety belt retractor aligning the anti-rotation tab through the sheet metal. Using the special tool, install the bolt.
3. Position the third row safety belt guide. Using the special tool, install the bolt.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Second row safety belt retractors
4. Install the second row safety belt retractor.
1
Position the second row safety belt retractor, aligning the anti-rotation tab through the sheet metal.
2
Using the special tool, install the bolt.
