Explorer 4WD V8-4.6L VIN W (2002)
4. Install the second row safety belt retractor.
1
Position the second row safety belt retractor, aligning the anti-rotation tab through the sheet metal.
2
Using the special tool, install the bolt.
5. Position the second row safety belt guide. Using the special tool, install the bolt.
NOTE: Make sure the safety belt webbing is not twisted prior to installation.
Vehicles with remote keyless entry (passenger side second row retractor only)
6. Position the remote keyless entry module. Install the bolts.
Third row safety belt retractors
7. Position the third row safety belt anchor. Using the special tool, install the bolt.