Explorer 4WD V8-4.6L VIN W (2002)
5. Disconnect the safety belt buckle and pretensioner.
1
Slide and disengage the safety belt buckle and pretensioner electrical connector locking clip.
2
Push in on the two release tabs and disconnect the safety belt buckle and pretensioner electrical connector.
INSTALLATION
WARNING: TO REDUCE THE RISK OF SERIOUS PERSONAL INJURY, READ AND FOLLOW ALL WARNINGS, CAUTIONS AND
NOTES AT THE BEGINNING OF THE REMOVAL PROCEDURE.
All vehicles
1. Disconnect the battery ground cable and wait at least one minute.
2. Connect the safety belt buckle and pretensioner electrical connector.
1
Connect the safety belt buckle and pretensioner electrical connector.
2
Slide and engage the safety belt buckle electrical connector locking clip.
3. Install the safety belt buckle and pretensioner.
1
Position the safety belt buckle and pretensioner to the seat.
2
Install the bolts.
Driver side only