Explorer 4WD V8-4.6L VIN W (2002)
6. Disconnect Intermediate Shaft Speed (ISS) sensor electrical connector.
7. Remove ISS sensor.
1
Remove the ISS sensor screw.
2
Remove the ISS sensor from the transmission.
^
Inspect the ISS sensor O-ring for damage. If damaged, install a new O-ring.
Installation
All vehicles
1. Inspect and lubricate O-ring with petroleum jelly.
1
Install the ISS sensor into the transmission.
2
Tighten ISS sensor screw.
2. Connect ISS sensor electrical connector.