Explorer 4WD V8-4.6L VIN W (2002)
5. Tighten the screws in a crisscross sequence.
6. NOTE: A new converter drain plug must be used to prevent leakage.
If removed, install a new converter drain plug.
7. If removed, install the converter housing access plug.
8. CAUTION: Damage will occur to the solenoid body assembly if the screw is tightened above the specification.
NOTE: Always install new O-ring seals on vehicle harness connector.
NOTE: Clean the area around connector to prevent contamination of the solenoid body connector.
NOTE: Use petroleum jelly to lubricate the O-ring seals to aid in the installation process.
Install and lubricate new O-ring seals on the transmission connector and connect the connector.