Explorer 4WD V8-4.6L VIN W (2002)
Power Window Switch: Service and Repair
WINDOW CONTROL SWITCH
Removal and Installation
1. Disconnect the battery ground cable.
2. Remove the window control switch plate assembly from the door trim panel.
-
Pry the front of the plate assembly upward to release the front hold down clip.
-
Slide the plate assembly forward to release rear tab.
-
Remove the plate assembly.
3. Disconnect the window switch electrical connectors.
4. Remove the window control switch from the plate.
-
Pry the release tabs.
-
Remove the window control switch.
5. To install, reverse the removal procedure.