Explorer 4WD V8-4.6L VIN W (2002)
11. Install the windshield glass aligning it to the marks previously made.
12. After the windshield glass is set, check for water leaks and add urethane adhesive where needed.
13. If necessary, remove excess urethane from the outside surface of the windshield glass.
14. Install the cowl grille.
15. Install the wiper pivot arms.
16. Install the front portion of the headliner.
17. NOTE: Overhead console without roof opening panel shown.
If equipped, install the overhead console.
-
Connect the electrical connectors and install the screw.
18. Install the sun-visors and retainers.
19. Install the interior rear view mirror.
20. Install the A-pillar trim panels.
