Explorer AWD V8-4.6L (2010)
![background image](/ford/explorer_awd/v8-4.6l/Page-985059.png)
-
Is the vehicle equipped with a PRB module?
Yes
GO to S22.
No
GO to S23.
-------------------------------------------------
S22 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE PRB MODULE DISCONNECTED
-
Disconnect: PRB Module C4322b.
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to S23.
No
CONNECT the negative battery cable. GO to S55.
-------------------------------------------------
S23 VERIFY VEHICLE EQUIPMENT - PAM
-
Inspect the vehicle for a PAM.
-
Is the vehicle equipped with a PAM?
Yes
GO to S24.
No
GO to S25.
-------------------------------------------------
S24 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TOGETHER WITH THE PAM DISCONNECTED
-
Disconnect: PAM C4014 (Mountaineer), C3267 (Explorer Sport Trac) or C4226 (Explorer).
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and the DLC C251-11, circuit VDB07 (VT/OG), harness
side.
-
Is the resistance less than 5 ohms?
Yes
GO to S25.