Explorer AWD V8-4.6L (2010)
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to S54.
No
GO to S40.
-------------------------------------------------
S40 VERIFY VEHICLE EQUIPMENT - PRB MODULE
-
Inspect the vehicle for a PRB module.
-
Is the vehicle equipped with a PRB module?
Yes
GO to S41.
No
GO to S42.
-------------------------------------------------
S41 CHECK THE MS-CAN (+) AND MS-CAN (-) CIRCUITS FOR A SHORT TO GROUND WITH THE PRB MODULE DISCONNECTED
-
Disconnect: PRB Module C4322b.
-
Measure the resistance between the DLC C251-3, circuit VDB06 (GY/OG), harness side and ground; and between the DLC C251-11, circuit
VDB07 (VT/OG), harness side and ground.
-
Are the resistances greater than 1,000 ohms?
Yes
CONNECT the negative battery cable. GO to S55.
No
GO to S42.
-------------------------------------------------
S42 VERIFY VEHICLE EQUIPMENT - PAM
-
Inspect the vehicle for a PAM.
-
Is the vehicle equipped with a PAM?
Yes
GO to S43.
No