Explorer Sport 2WD V6-245 4.0L SOHC VIN K SFI (2001)
Fog/Driving Lamp Switch: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the instrument panel finish panel.
1
Remove the screws.
2
Remove the center instrument panel finish panel.
^
Disconnect the electrical connectors.
3. Remove the fog lamp switch.
1
Remove the screws.
2
Remove the mounting bezel.
3
Release the two tabs and remove the fog lamp switch.
INSTALLATION
1. To install, reverse the removal procedure.