Explorer Sport 2WD V6-245 4.0L SOHC VIN K SFI (2001)
48. Remove the side air bag stud covers.
49. Remove the side air bag module nuts.
NOTE: If installing a new side air bag module, use new retaining nuts. If the same side air bag module is to be reused, then reuse the side air bag
module retaining nuts.
50. Position the side air bag module and shield out through the seat back cushion opening.
51. Remove the side air bag module.
1
Slide the side air bag module electrical connector locking clip to disengage it.
2
Release the connector tabs by pushing in on them, then disconnect the side air bag module electrical connector.
3
Remove the side air bag module.