Explorer Sport 2WD V6-4.0L VIN E (2002)
Multifunction Electronic Control Modules: Service and Repair
Vehicle Security Module
REMOVAL
CAUTION: Prior to removal of the module, it is necessary to upload module configuration information to the appropriate diagnostic equipment. This
information needs to be downloaded into the new module once installed.
1. Disconnect the battery ground cable.
2. Remove the LH rear quarter trim panel.
3. Disconnect the electrical connectors.
4. Remove the central security module.
1
Remove the bolts.
2
Remove the central security module.
INSTALLATION
1. To install, reverse the removal procedure.