Explorer Sport 2WD V6-4.0L VIN E (2002)
Rear Door Window Motor: Service and Repair
Rear Window Glass Motor
REMOVAL
NOTE:
^
The power rear window motor can be removed and a new one installed without removing the seat or trim panel.
^
When the power rear window motor is removed and installed, the motor must be initialized.
1. Fold down the passenger rear seat back.
2. Open the luggage compartment trim panel access door.
3. Remove the spare tire jack and handle assembly.
4. Position the carpet aside and position the water shield back from the rear window glass motor to access bolts.
NOTE: The rear window glass water shield uses a reusable butyl rubber adhesive. A new water shield does not have to be installed unless it is
damaged or if the butyl rubber adhesive does not adhere to a section of the sheet metal.