Explorer Sport 2WD V6-4.0L VIN E (2002)
Trunk / Liftgate Latch: Service and Repair
Liftgate Latch
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the liftgate trim panel.
3. Remove the air escape vent panel.
1
Remove the pin-type retainers.
2
Remove the air escape vent panel.
4. Remove the watershield.
5. Disconnect the liftgate latch release rod from the liftgate latch remote control.
1
Open the clip.
2
Disconnect the liftgate latch release rod.
6. Remove the liftgate latch.
1
Remove the bolts.
2
Disconnect the electrical connector.
3
Remove the liftgate latch and the liftgate release rod.